Black
8 inch Single Wall Stove Pipe |
Economical, high
quailty stove pipe (also called connector pipe) used to attach
a stove to a chimney. This regular 24 gauge stovepipe is for
Wood, Oil, Coal, or Gas fuels. The smaller the gauge, the thicker the metal. 24 is the accepted standard.
-
24-Gauge
-
Three
stovepipe screws create secure connections between
pipes.
-
18"
clearance to combustibles
-
National
code prohibits enclosed pipe installations
-
National
code requires stovepipe to exit the room that
it originates in, prohibits stovepipe from penetrating
combustable material
|
|
|
|
| |
12" Straight
Pipe
Self-locking
pipe presses together until it snaps. No tools needed
to close seams. Joint can be cut to any length. |
|
|
| |
|
24" Straight
Pipe
Self-locking pipe presses together until it snaps.
No tools needed to close seams. Joint can be cut to any
length. |
|
| |
|
Adjustable Elbow
Double seams permit each section to turn freely without
any danger of becoming disconnected. Can quickly be adjusted
to any straight line and a right angle. |
|
| |
|
|
90° Elbow
Corrugated lock seamed, one piece construction. Lock seamed for strength and to prevent coming apart. 2 1/2" ends.
|
|
| |
|
Tee Joint
Both sections assembled with "Snaplock" seam. Can be easily turned to make a secure lock. |
|
| |
|
Trim Cap
Used to close off one end of a stove pipe tee. Use of a tee cap allows for easy access for pipe cleaning. |
|
| |
|
Reducer From 8" to 6" pipe
Easily adapts large stove pipe to smaller stove pipe. Small end of Reducer is crimped. |
|
| |
|
|
Reducer From 8" to 7" pipe
Easily adapts large stove pipe to smaller stove pipe. Small end of Reducer is crimped. |
|
| |
|
Trim Collar
Covers excess area around flue opening. Provides a finished
look to stove pipe installation. |
|
| |
|
Oval to Round Boot
is 8" high with
a 8" round end. The oval end is approximately 81/4" X 63/16". |
|
|
| |
|
Draw Band Connector
is used when the flue collar of a stove is a bit too big.
|
|
| |
|
Slip Connector 11-1/2" length (adjusts 3"-9")
Use to adapt pipe to ceiling support box or finishing collar. Adds 3" - 9" of length to rigid pipe. Allows drip-free installation without cutting the pipe. Can be used in line to create a telescoping combination when used with a straight length of pipe. |
|
| |
|
Starter Pipe
allows for easy connection of pipe between the stove and the first joint of pipe. Both ends of starter pipe are crimped.
|
|
| |
|
|
