7 Inch Single Wall Duravent Stove Pipe
We cannot ship any of the items on this page to Alaska, Hawaii, Puerto Rico or Canada.
Single wall stove pipe is ideal for installations
where there is a minimum 18" clearance from the stove until
it enters the chimney. For an economical, drip-free, single-wall
stovepipe, DuraBlack is an excellent choice. Built to high standards,
DuraBlack is constructed with die-formed end fittings. Adjustable
lengths eliminate the need for cutting and crimping. Please note:
All of the Black 10 inch DuraVent DuraBlack Single Wall Stove
Pipe on this page is 24 gauge.
- 24 gauge
- Spot-welded lock seams
- 18"
clearance to combustibles
12" Straight
Pipe
Use for a single-wall connector pipe. Requires 18” clearance
to combustibles. |
|
7" x 12" |
Ocp114988 |
$43.49 |
|
|
24" Straight
Pipe
Use for a single-wall connector pipe. Requires 18” clearance
to combustibles. |
|
7" x 24" |
Ocp114989 |
$55.49 |
|
|
90 Degree Elbow
Offsets obstructions as needed. Elbows angles are now adjustable. Adjustable elbows are manufactured drip free so creosote travels back to the stove as intended. Not recommended for rear exit appliances. |
|
|
Damper Section
Install at, or close to, the stove outlet in-line. 5” pipe section with the damper pre-installed. |
|
|
Double-Skirted Stovetop Adaptor
Use for a single-wall connector pipe. Requires 18” clearance
to combustibles. |
|
|
Slip Connector With Trim
Use to adapt DuraBlack pipe to ceiling support box
or finishing collar. Adds 3” - 13” of length to
rigid pipe. Allows drip-free installation without cutting
the pipe. Can be used in line to create a telescoping combination
when used with a straight length of pipe. Requires screws. |
|
14" x 3-13" |
Ocp114990 |
$80.49 |
|
|
Snap-Lock Adaptor with Trim
Snaps into the ceiling support box or finishing collar and extends down to fit into stovepipe for a drip-free connection to a DuraTech, DuraPlus, DuraPlus HTC, or DuraLiner Chimney system. Provides a strong mechanical connection. Adapter will work with all 6”-8” DuraPlus, 6”-8” DuraPlus HTC, and 7”-8” DuraTech installations. |
|
|
Stovetop Adaptor
Use to adapt DuraBlack stovepipe to appliance flue outlet. |
|
|
Trim Collar
Use as a decorative Trim Collar for DuraBlack connection to chimney. |
|
|
Increaser
Use to increase from a smaller appliance flue outlet to a larger diameter chimney or stovepipe. |
|
|
|
1. Stick with one brand of stovepipe
for connecting wood stoves to chimney. This ensures the most secure
stovepipe connection. Learn
why a good stovepipe connection is so important.
2. For most stovepipes 3 screws are required to fit each pipe connection
tightly
3. New stovepipe and wood stove installations may smoke a little and
emit an odor when first used. This is normal curing of the paint
on the pipe. Allow ventilation of an open a window or door to allow
the smoke and fumes to escape during the beginning of your first wood burning stove fire.
Never use stovepipe as a chimney or pass it through an unprotected wall.
Return to top of page
|
M&G DuraVent provides no warranty for the following
professional products if such products are not installed by a trained
professional installer: DuraTech®, DuraPlus HTC®, DuraChimney®
II, PelletVent Pro®, DirectVent Pro®, FasNSeal®, FasNSeal®
W2, FasNSeal® Flex, and PolyPro®, and M&G DuraVent’s
relining products including DuraLiner®, DuraFlex® (SW, Pro, 316,
304), and Ventinox®.
• Any M&G DuraVent product sold by a non-approved
website will not be warranted.
• Any customer that has bought product from a non-approved
website will not be given technical assistance or support from M&G
DuraVent.
• Any website not compliant with this Internet Sales
Policy shall not use M&G DuraVent’s trademarked and registered
properties, and will be notified to remove them immediately. DuraVent
reserves the right to enforce its intellectual property rights against
entities not in compliance with this Internet Sales Policy.