6 Inch Single Wall Duravent Stove Pipe
Single wall stove pipe is ideal for installations where there is a minimum 18" clearance from the stove until it enters the chimney. For an economical, drip-free, single-wall stovepipe, DuraBlack is an excellent choice. Built to high standards, DuraBlack is constructed with die-formed end fittings. Adjustable lengths eliminate the need for cutting and crimping. Please note: All of the Black 10 inch DuraVent DuraBlack Single Wall Stove Pipe on this page is 24 gauge.
- 24 gauge
- Spot-welded lock seams
- 18" clearance to combustibles
12" Straight
Pipe Use for a single-wall connector pipe. Requires 18” clearance to combustibles. |
||||
|
24" Straight
Pipe Use for a single-wall connector pipe. Requires 18” clearance to combustibles. |
||||
|
48" Straight
Pipe Use for a single-wall connector pipe. Requires 18” clearance to combustibles. |
||||
|
45 Degree Elbow Offsets obstructions as needed. Elbows angles are now adjustable. Adjustable elbows are manufactured drip free so creosote travels back to the stove as intended. |
||||
|
Damper Section Install at, or close to, the stove outlet in-line. 5” pipe section with the damper pre-installed. |
||||
|
Double-Skirted Stovetop Adaptor Use for a single-wall connector pipe. Requires 18” clearance to combustibles. |
||||
|
Slip Connector With Trim Use to adapt DuraBlack pipe to ceiling support box or finishing collar. Adds 3” - 13” of length to rigid pipe. Allows drip-free installation without cutting the pipe. Can be used in line to create a telescoping combination when used with a straight length of pipe. Requires screws. |
||||
|
Snap-Lock Adaptor with Trim Snaps into the ceiling support box or finishing collar and extends down to fit into stovepipe for a drip-free connection to a DuraTech, DuraPlus, DuraPlus HTC, or DuraLiner Chimney system. Provides a strong mechanical connection. Adapter will work with all 6”-8” DuraPlus, 6”-8” DuraPlus HTC, and 7”-8” DuraTech installations. |
||||
|
Increaser Use to increase from a smaller appliance flue outlet to a larger diameter chimney or stovepipe. |
||||
|
Telescoping Length Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. Adjusts from 44”- 68”. No cutting required. |
||||
|
Frequently Asked Questions About Stove Pipe |
A Few Words To The Wise |
1. Stick with one brand of stovepipe
for connecting wood stoves to chimney. This ensures the most secure
stovepipe connection. Learn
why a good stovepipe connection is so important. |
• Any M&G DuraVent product sold by a non-approved website will not be warranted.
• Any customer that has bought product from a non-approved website will not be given technical assistance or support from M&G DuraVent.
• Any website not compliant with this Internet Sales Policy shall not use M&G DuraVent’s trademarked and registered properties, and will be notified to remove them immediately. DuraVent reserves the right to enforce its intellectual property rights against entities not in compliance with this Internet Sales Policy.