Description of available pieces
Straight Pipe - Use for a single-wall
connector pipe. Requires 18” clearance to combustibles.
45 degree Elbow - Offsets obstructions as
needed. Elbows angles are now adjustable. Adjustable elbows
are manufactured drip free so creosote travels back to the stove
as intended.
90 degree Elbow - Offsets obstructions as
needed. Elbows angles are now adjustable. Adjustable elbows
are manufactured drip free so creosote travels back to the stove
as intended. Not recommended for rear exit appliances.
Damper Section - Install at, or close to,
the stove outlet in-line. 5” pipe section with the damper
pre-installed.
Double-Skirted Stovetop Adapter - Use to
adapt DuraBlack stovepipe to appliance flue outlets. Outer wall
covers appliance flue outlet.
Slip Connector - Use to adapt DuraBlack pipe
to ceiling support box or finishing collar. Adds 3” -
13” of length to rigid pipe. Allows drip-free installation
without cutting the pipe. Can be used in line to create a telescoping
combination when used with a straight length of pipe.
Snap-Lock Adapter with Trim - Snaps into
the ceiling support box or finishing collar and extends down
to fit into stovepipe for a drip-free connection to a DuraTech,
DuraPlus, DuraPlus HTC, or DuraLiner Chimney system. Provides
a strong mechanical connection. Adapter will work with all 6”-8”
DuraPlus, 6”-8” DuraPlus HTC, and 7”-8”
DuraTech installations. Adapter will work with 5”-6”
DuraTech Ceiling Support Box installations only.
Stovetop Adaptor (Starter Pipe) - Use to
adapt DuraBlack stovepipe to appliance flue outlet
Tee with Clean-Out Cap - Use with rear exit
appliances and appliances that require a barometric damper.
Trim Collar - Use as a decorative Trim Collar
for DuraBlack connection to chimney.
Telescoping Length - Use for a two-piece
installation. Connects directly from stove to ceiling support
box or finishing collar. Adjusts from 44”- 68”.
No cutting required.
